SearchAssembly type: Walls and Partitions; Protection type: Wood Stud, Gypsum Board, Lath &/or Plaster; Rating: Rating ≥ 1 hr and < 2 hr Resultsviewing 51-74 of 74 « 4 1 | 2 | 3
Marking: General. Use: Two Conductor Cord or Three Conductor Cord 4 with No. 18 AWG Grounding 4 "For use as listed power supply cords (permanently attached and not exceeding 8 feet in length) for по ссылке irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less."
Rating: 200 deg C, 600 Vac, Horizontal Flame.
Conductor: 0.5 - 250 sq mm, solid or stranded copper (tin, nickel or silver coated). If tinned copper strands are used, they shall be 0.0152 in diameter or larger.
BXUV - Fire Resistance Ratings 4 ANSI/UL 263 Certified for United States BXUV7 - Fire Resistance Ratings - CAN/ULC-S101 Certified for Canada.
See General Information for Fire-resistance Ratings - ANSI/UL 263 Certified for United States Design Criteria and Allowable Variances
Rating: 60 deg C, 30 Vac, Cable flame. Conductor: 36 AWG - 16 AWG, solid or stranded round. Insulation: Extruded PP, 3.5 - 30 mils thickness to Labeled or complies with manufacturer's AWM Procedure.
404 Not Found
UL 1213 PTFE insulated thin walled hook-up wire is used for internal wiring. Rated 105C, CSA voltage 150V and 4 resistant 60C.
1.1 Scope and object This standard is applicable to ac contactors applied at voltages in the range of 1 501V to 15kV, and metal-enclosed contactor-based controllers, control centers, and 4 control assemblies and associated equipment applied at voltages in the range 4 751V to 15kV, designed for operation at frequencies of 50 or 60 Hz on three-phase systems.
The cable is intended for use with specific distributed generation equipment/devices such as 4 modules, inverters, solar trackers, etc.
404 Not Found
DG Cable is suitable for use between cable trays and utilization.
UL 1012. 1.5 A battery charger not wholly within the scope of one of the standards specified in 1.4 shall be investigated to the requirements of this Standard supplemented by the applicable requirements of whichever of the standards in 1.4 is most applicable.
1.6 These requirements do not cover a power supply for a fire-protective.
Rating: 80 deg C, 30 4, Cable flame (construction A), Horizontal flame (construction B). Conductor: 40 AWG minimum. 4 Labeled or complying with Manufacture's AWM Procedure having a minimum rating of 80 deg C, 30 V.
We'll send you a link that lets 4 create a new password.
It looks like you entered an employee email address, but this is the 4 sign-in.
Use the link below instead.
New Password Your password must be 4 least 8 characters, including at least 1 number and at least 1 capital letter.
Design Studio Find the right fire-rated assemblies and design details drawings for your architectural plans.
Estimate materials 4 find USG equivalents for your building projects.
USG Sustainability Tool Find all the information you need on USG products for LEED, LBC and WELL certifications, including Environmental and Health Product Declarations, percent recycled content, and more.
Because 4 and BIM files can be modified by other parties, without notice or indication of such modifications, modification of Нажмите для продолжения Product Guide Specifications and Drawings is the sole responsibility of the Design Professional.
® 2007-2019 USG 4 Studio, USG Corporation".